Replacement Of The Cassette Transport Motor M2 - Kodak Miniloader 2000 Service Manual

REPLACEMENTS
7
. Move the DRIVE PULLEY with WASHER to the left and take out the DOWEL PIN.
8
. Manually open the CASSETTE CENTRING.
9
. Shift the TRANSPORT ROLLER fully to the left to disengage the TRANSPORT
ROLLER on the right-hand side.
10.
Lift the right-hand end off the TRANSPORT ROLLER up as far as possible and
carefully pull it out to the right.
Do not loose the parts which are still on the left-hand side of the TRANSPORT ROLLER.
11.
Install the new LONG TRANSPORT ROLLER
FUNCTION TEST.
1
. Check that a CASSETTE is transported correctly forward and backward.
2
. Ensure that all PANELS are mounted correctly and that all PROTECTIVE GROUND
CABLES are properly connected.

REPLACEMENT OF THE CASSETTE TRANSPORT MOTOR M2.

Always order MOTOR PN 9228010 and RETAINING RING PN 4500416
1
. Switch off the ML2000 (ML2000 P).
2
. Take off the PANELS.
6/97
NOTE
NOTE
figure 2-9
2-10
SM 3477
KODAK AG, Stuttgart