Table of Contents
Advertisement
SM 3477
3
.
Check that the FILM is picked up from the CASSETTE.
4
.
Check that the CASSETTE SUCKER BAR CARRIAGE moves freely forward and
backward.
5
.
Check that the FILM is transported correctly into the FILM CHUTE.
6
.
Use various FILM SIZES.
REPLACEMENT OF SOLENOID CASSETTE SUCKER BAR TILTING Y7
1
.
Do PROCEDURE "REMOVAL OF CONVEYOR".
2
.
Put CARRIAGE ASSEMBLY upside down.
3
.
Pull CASSETTE SUCKER BAR carefully forward to get access to the SOLENOID
CASSETTE SUCKER BAR TILTING Y7.
4
.
Remove the PIN to disconnect the ARMATURE from the ACTUATOR.
5
.
Undo the NUT.
6
.
Cut the WIRE TIES.
7
.
Replace the SOLENOID.
FUNCTION TEST
1
.
Check that the SOLENOID CASSETTE SUCKER BAR TILTING Y7 tilts the
CASSETTE SUCKER BAR.
Start the SERVICE PROGRAM
Select SERVICE MODE from the GLOBAL MENU ......................... press ENTER
ENTER SERVICE MODE MESSAGE is displayed .......................... press ENTER
UNIT DATA are displayed....................................................................... press ENTER
Select COMPONENT TEST ................................................................... press ENTER
Select SOLENOIDS ................................................................................... press ENTER
KODAK AG, Stuttgart
figure 2-31
2-33
REPLACEMENTS
6/97
Advertisement
Chapters
Table of Contents
