Kodak Miniloader 2000 Service Manual page 52

ADJUSTMENTS
Set the MOUNTING BRACKET of SENSOR B17 at a distance of 154 ± 1 mm to the
2
.
inner side of the REAR STEEL ROD.
Set the MOUNTING BRACKET of SENSOR B18 at a distance of 58.5 ± 1 mm to the
3
.
outer side of the REAR STEEL ROD.
PART 2: CASSETTE SUCKER BAR ADJUSTMENT
1
. Place the ADJUSTMENT PLATE TL 4804 on the TRANSPORT ROLLERS and push it
to the CASSETTE END STOP.
2
. Manually move the CASSETTE SUCKER BAR CARRIAGE forward for approximately
40 mm. This allows the CASSETTE SUCKER BAR to tilt.
6/97
figure 3-6
NOTE
This is a ML700 TOOL.
figure 3-7
3-6
SM 3477
KODAK AG, Stuttgart