Kodak Miniloader 2000 Service Manual page 82

ADJUSTMENTS
SPECIAL TOOLS:
Do this adjustment in case of false DOUBLE SHEET DETECTION only.
1
. Take of the PANELS of the ML2000 (ML2000 P).
Do not enable the INTERLOCK SWITCHES. The MOTORS must not run during this adjustment pro-
2
. Connect the DVM to TP4 (GND) and to the right-hand side of RESISTOR R14 (both
on PCB A5). Use TEST LEAD TIPS TL 2095 (or similar).
6/97
DIGITAL VOLTMETER
TEST LEAD TIPS TL 2095 (or similar)
NOTE
CAUTION
cedure.
figure 3-39
3-36
SM 3477
KODAK AG, Stuttgart