Cassette Opener Mechanism - Kodak Miniloader 2000 Service Manual

ADJUSTMENTS
5
. Open the INPUT FLAP.
Select OPEN
6
. Adjust SENSOR B3/C_IF_EO INPUT FLAP OPEN until the FLAP is fully open.
7
. Exit the SERVICE MODE.
Press BACKSPACE 3 times
Select LEAVE COMPONENT TEST ..................................................... press ENTER
Select QUIT ML2000 SERVICE MODE ............................................... press ENTER
Select Quit the program ............................................................................ press ENTER.

CASSETTE OPENER MECHANISM

PURPOSE:
This adjustment makes sure that all CASSETTES are opened and closed correctly and that
the OPENER MECHANISM moves over the correct distance to avoid scratches on the
CASSETTE LID SCREEN caused by the CASSETTE SUCKER BAR.
BE VERY CAREFUL WHEN DOING THIS ADJUSTMENT. THE OPENER MOTOR AND THE
OPENER MECHANISM ARE VERY STRONG. THEY MAY SQUEEZE YOUR HAND AND TRAP
YOU IF YOU TRY TO STOP IT MANUALLY. NEVER START THE CASSETTE OPENER MOTOR
WHEN SOMEONE'S HANDS ARE IN THE CASSETTE AREA.
This adjustment may affect the adjustment REST POSITION.
1
. Switch off the ML2000 (ML2000 P).
2
. Take off the PANELS.
3
. Loosen the MOUNTING SCREWS of the OPENER STOP PLATE.
6/97
figure 3-1
WARNING
NOTE
3-2
SM 3477
KODAK AG, Stuttgart