Kodak Miniloader 2000 Service Manual page 25

SM 3477
24.
To mount the CHAIN is the next step. To do this the CASSETTE OPENER
MECHANISM and the MOTOR DRIVE GEAR have to be in the correct position.
a. The CASSETTE OPENER MECHANISM must be in its bottom position.
b. The STOP PIN of the DRIVE GEAR should just touch the bottom STOP BOLT of the
STOP PLATE.
Select DOWN until the STOP PIN just touches the STOP BOLT.
KODAK AG, Stuttgart
figure 2-13
2-15
REPLACEMENTS
6/97