Kodak Miniloader 2000 Service Manual page 70

ADJUSTMENTS
Check that the MAGAZINE SUCKERS are 3 mm ± 0.5 away from the leading edge
41.
of the film. Use the DENTIST MIRROR to observe the position of the FILM POCKET
SUCKERS. Make sure that the FILM is touching the MAGAZINE WALL.
3 ± 0.5 mm
42.
If the distance is not correct, or if the MAGAZINE SUCKER BAR touches the
MAGAZINE WALL proceed with step 43. Otherwise proceed with step 50.
43.
Move the FILM POCKET up,so that it can be rotated out of the MAGAZINE.
Select MOVE OUT POSITION
44.
Loosen the MOUNTING SCREW of the FILM POCKET SUCKER BAR ARM and
rotate the SUCKER BAR in or out as required. Tighten MOUNTING SCREW and LOCK
NUT.
6/97
figure 3-26
NOTE
figure 3-27
3-24
SM 3477
KODAK AG, Stuttgart