Table of Contents
Advertisement
124 Appendix C: BIOS reference for Matrox Supersight SHB-5520
Item
Options
Super IO Chip
Item
Options
Serial Port
Enabled*
Disabled
Device Settings
Change Settings
Auto*
IO=3F8h and IRQ=4
IO=3F8h and
IRQ=3,4,5,6,7,10,11,12
IO=2F8h and
IRQ=3,4,5,6,7,10,11,12
IO=3E8h and
IRQ=3,4,5,6,7,10,11,12
IO=2E8h and
IRQ=3,4,5,6,7,10,11,12
Super IO Configuration submenu
The Super IO Configuration submenu allows you to configure the Super IO chip.
Meaning
This item reports the name of the Super IO chip on the Matrox Supersight SHB-5520 board. The Super IO
chip name identifies the baseboard (motherboard) management controller (BMC) device implemented on
your Matrox Supersight SHB-5520.
Serial Port n Configuration sub-submenu
The Serial Port n Configuration sub-submenu allows you to change device
settings for RS-232 serial portn, where n can be either 0 or 1.
Meaning
This item allows you to enable the selected serial port.
Note that the default setting of this value is optimized for the Matrox Supersight SHB-5520 board.
❖
This item reports the IO and interrupt request (IRQ) addresses of the selected
serial port, for example IO=3F8h and IRQ=4.
This item allows you to change the IO and IRQ device settings for the selected
serial port.
Note that the default setting of this value is optimized for the Matrox
❖
Supersight SHB-5520 board.
Note that this item is only
visible when the Serial Port
item is set to Enabled.
Advertisement
Table of Contents
