Matrox Supersight Installation And Hardware Reference page 82

Hide thumbs Also See for Supersight:

Table of Contents

82 Appendix B: Technical reference

• 4 USB ports and 1 USB header (USB 2.0 and 1.1 compatible). Note that there

are an additional two USB ports on the chassis's front panel that are directly lined

to the first Matrox Supersight SHB-5520

• Two 10/100/1000 BaseT Ethernet ports on Matrox Supersight SHB-5520's

bracket.

• One analog display controller. The following display resolutions are available:

Standard display resolution

1680 × 1050

1600 × 1200

1440 × 900

1280 × 1024

1152 × 864

1024 × 768

800 × 600

640 × 480

• Six 204-pin SO-DIMM slots, with each slot supporting a 666 MHz DDR3

non-ECC SDRAM memory module, up to 8 Gbytes in size. The DDR3 modules

run at up to 666 MHz (DDR3-1333). The total amount of memory can be

48 Gbytes.

*. The first SHB is the SHB that is in the left-most SHB slot on the backplane, as seen

from the front panel (see the illustration in the Establishing which boards can be

installed section, in Chapter 3: Connecting devices to the backplane and to the Matrox

Supersight SHB-5520 board).

via the backplane.

Analog video

RGB 16-bits/pixel

RGB 24-bits/pixel (packed)

RGB 32-bits/pixel

Maximum refresh rate

60 Hz

85 Hz

Table of Contents