Environmental Specifications; Default Hard Disk Drive - Matrox Supersight Installation And Hardware Reference

Hide thumbs Also See for Supersight:
Table of Contents

Advertisement

• Three or five 7-pin SATA connectors (3 on-board and, for the first SHB-5520, 2
on the backplane through the edge connector).
• Two RS-232 serial ports (each supporting 1 device). Each is controlled with a
16550/16450-compatible UART, which feature independently programmable
baud rates and internal 16-byte FIFO memory buffers.
• 4-Mbyte BIOS flash memory device with a life-cycle of 10, 000 write cycles.

Environmental specifications

• 10°C (50°F) to 35°C (95°F) operating temperature.
• -40°C (-40°F) to 85°C (185°F) storage temperature.
• Up to 90% (non-condensing) relative humidity.

Default hard disk drive

The pre-installed hard disk drives have the following features:
• Supports up to a SATA 2.0 (3.0 Gbps), also referred to as SATA_II or SATA-300.
• Storage capacity: 250 Gbytes
• 2.5-inch platter.
• Rotational speed: 7200 rpm.
• SATA 2.0 (3.0 Gbps) connector.
• Hot-swappable.
• 8 Mbyte cache.
*. The storage capacity of the available hard disk drives might change over time. Contact
your Matrox sales representative for details.
Environmental specifications
*
.
83

Advertisement

Table of Contents
loading

Table of Contents