Adding boards to the backplane
Once you have removed the cover and the retainer guide(s), you are ready to
connect your board(s) to the backplane. The following illustration shows the
available board connectors on the backplanes of the Matrox Supersight e2 unit
and the Matrox Supersight Solo unit.
Matrox Supersight e2 backplane
Matrox Supersight Solo backplane
1. These PCIe connectors are only present on the 13 connector
variant of Matrox Supersight Solo.
Adding boards to the backplane
SHB connector
PCIe connector
SHB connector
PCIe connectors
SHB connector
PCIe connectors
SHB connector
PCIe connectors
SHB connector
PCIe connectors
1
39
[