System Event Log Submenu - Matrox Supersight Installation And Hardware Reference

Warning
Item
Options
SEL Components
Enable
Disable*
Erase SEL
No*
Yes on next Reset
Yes on every Reset
When SEL is Full
Do nothing*
Erase immediately
Log EPFI Status Codes
Both*
Error codes
Progress code
Disabled

System event log submenu

The System event log submenu allows you to configure the different settings
relating to the logging of system events.
Setting the items below to the wrong values can cause the unit to malfunction.
Meaning
This item allows you to enable all system event log (SEL) components.
This item allows you to select when the messages of the system event log will be erased.
If this item is set to No, the SEL is never erased.
If this item is set to Yes on next Reset, the SEL is erased the next time your unit is rebooted.
If this item is set to Yes on every Reset, the SEL is erased each time your unit is rebooted.
This item allows you to select what to do when the SEL buffer is full.
If this item is set to Do nothing, a warning message might be displayed by the BIOS and no more system
event messages will be logged until the SEL buffer is cleared.
If this item is set to Erase immediately, the SEL buffer is cleared, and new system event messages are
logged as needed.
This item allows you to select which type of status codes to log.
Server Mgmt 141