Table of Contents
Advertisement
20 Chapter 1: Before you begin
Optional installed components
You might have also purchased any of the following optional Matrox components
to complete the unit. Note that, typically, these components are pre-installed if
purchased at the same time as your Matrox Supersight unit.
Additional component
Matrox Supersight
SHB-5520 boards
Hard disk drives
❖ Note that to order these items separately, contact your Matrox sales representative.
Optional components
You might have also purchased any of the following optional Matrox components
to complete the unit. These will not come pre-installed.
Additional component
Adapter boards
USB and COM port I/O
adapter bracket
Additional I/O adapter
bracket
❖ Note that to order these items separately, contact your Matrox sales representative.
Details
You can order up to 3 additional Matrox Supersight SHB-5520 boards for a
Matrox Supersight e2 unit.
You can order three additional SATA hard disk drives (for a maximum total of
four), along with its associated cabling. Note that, in a typical installation, one
hard disk drive for each SHB in your Matrox Supersight will come
pre-installed with an operating system.
Details
You can install PCIe boards. For third-party GPU boards, contact your Matrox
sales representative for the list of pre-qualified vendors.
You can order a USB and COM port I/O adapter bracket, featuring two USB
ports and two COM port connectors (DB-9). This bracket allows you to
access the internal USB ports and/or COM ports of the SHBs from outside of
the chassis.
Additional I/O adapter brackets might be available. depending on the adapter
board(s) you order.
Advertisement
Table of Contents
