Ntconfig: Basic Configuration Utility - Matrox 4Sight User Manual

46 Chapter 3: Managing the Matrox 4Sight under Windows NT Embedded

NTConfig: Basic configuration utility

A utility called NTConfig (NTConfig.exe) is available to
configure basic information in the registry database of
Windows NT Embedded.
NTConfig allows the user to directly control four groups of
options through the graphical user interface (GUI). Four of
these options, Network settings..., Display Settings...,
Auxiliary I/O Settings, and Keyboard Settings..., have
previously been discussed in
Chapter 2: Connecting and configuring external peripherals to
the unit. The final option is Auto Logon Settings... which is
enabled by default, and configures the startup command line
option and auto-logon settings.
You can refer to Appendix B of this manual for a list of all the
registry entries that can be modified using NTConfig. Note,
however, that we recommend that you use NTConfig to change
these entries.
To access the NTConfig GUI, type NTConfig in a command
prompt window. Upon exiting the utility, you will be asked if
you want to reboot the unit immediately to activate the new
configuration.
NTConfig also has a number of command line options, which
allow you to perform several tasks from the Windows command
prompt. NTConfig has the following command line options:
Reboot
Shutdown
DMACheck
Mem
Autopopup
For a complete description of these NTConfig options, please
see Appendix B: NTConfig Windows NT Embedded registry.