Matrox Supersight Installation And Hardware Reference page 59

6. If present, remove the old DVD drive from the DVD enclosure. To do so, remove
the two DVD enclosure screws on the left side, used to connect the DVD enclosure
to the drive-tray.
DVD
DVD enclosure
7. Slide the new DVD drive into the DVD enclosure.
8. Attach the DVD drive to its protective DVD enclosure using the screws.
Connecting devices to the internal connectors of the SHB
enclosure screw
screw
DVD enclosure
After removing DVD
enclosure screws on the left
side, slide the DVD drive out
of the DVD enclosure
59
.