Networking Connections - Matrox Supersight Installation And Hardware Reference

32 Chapter 2: Connecting peripherals to the front and back panels of the unit
Required cabling
for Ethernet
connections

Networking connections

You can connect the Matrox Supersight unit to your local area network (LAN).
To do so, connect a network cable to one of the two Gbit Ethernet connectors on
the bracket of the SHB.
Matrox Supersight can gain access to a LAN via Gbit Ethernet (1000 BaseT), Fast
Ethernet (100BaseT), or Twisted Pair Ethernet (10BaseT) through the two Gbit
Ethernet connectors.
If you plan to use Gbit Ethernet, use a Category 5e (CAT5e) cable. If you plan to
use Fast Ethernet, use a Twisted Pair Category 5 (UTP5) cable. If you plan to use
Twisted Pair Ethernet, use a UTP5 or UTP3 cable.