148 Appendix C: BIOS reference for Matrox Supersight SHB-5520
Number of beeps
Message
1
Invalid password.
5
No console device found.
6
Flash updated has failed.
8
Platform PCI resource
requirements cannot be met.
Types of beep codes
The beep codes denote that errors occurred during POST, but before POST gains
access to the display controller. The most-commonly occurring beep codes are as
follows:
Explanation
The password submitted is incorrect. Try again.
To communicate with your Matrox Supersight, connect a keyboard and mouse.
The attempt to update the BIOS of your Matrox Supersight has failed. The BIOS is corrupt.
Contact your Matrox representative.
The PCI resource requirements specified in the BIOS for your Matrox Supersight unit
cannot be met. There are too many memory resources to map in the available system
memory map. Enable the Above 4G Decoding item in the PCI subsystem Settings menu
or remove boards from your unit.