Removing The Drive-Tray - Matrox Supersight Installation And Hardware Reference

Removing the drive-tray

In some cases, when installing hardware in the unit, you might need to remove
the drive tray (for example, when installing a DVD drive or a chassis fan). To
remove the drive tray:
1. Unlock and open the front panel of the unit, using the provided key.
2. Disconnect all the wiring from the hard disk drive(s) and the optical disk drive.
3. Remove the six drive-tray screws.
drive-tray
screw
drive-tray
screw
drive-tray
screw
drive-tray
screw
Removing the drive-tray
drive-tray
drive-tray
screw
screw
37