Table of Contents
Advertisement
Back panel
The back panel has the following connectors (on the bracket of the Matrox
Supersight SHB-5520):
• Two Gbit Ethernet connectors (10/100/1000 BaseT).
• Two USB connectors (USB 2.0 and 1.1 compatible).
• One analog video output connector.
There are also four power connectors on the back panel of the unit.
USB connectors
Each of the USB connectors is a rectangular, Series "A", 4-pin receptacle, running
at 480 Mbits/sec. These USB 2.0 interfaces, which are also USB 1.1-compatible,
support high-speed peripherals such as an external hard disk drive, a
USB-connected CD/DVD drive, or a printer, as well as low-speed peripherals such
as a keyboard or mouse. A single USB interface can support up to 127 devices.
The pinout of this standard connector follows USB Specification v2.0 from the
USB Implementers Forum.
• Operating voltage and maximum current: 5 V, 500 mA.
• Auto-resettable fuse: Yes.
Gbit Ethernet connectors
The two Gbit Ethernet connectors are identical 8-pin, RJ45 connectors. The
pinout of these connectors follows the 1000 BaseT Gbit Ethernet standard found
in the IEEE 802.3-2002 standard.
Pinout descriptions of external connectors
91
Advertisement
Table of Contents
