Mounting / Cleaning Options - ABB Aztec ATS430 Operating Instructions Manual

3.3 Mounting / Cleaning options

Sensor mounting / cleaning options are shown in Table. 3.1 /
Fig. 3.3:
Item Mounting option
A Open channel mounting kit:
— ATS4000768, suitable for floor/wall (surface) mounting
(ATS4000720 chain mounting kit available separately)
B Wall mounting accessory:
— ATS4000700, suitable for 40 mm / 1.25 in dia dip pole
Dip pole assembly (supplied with 40 mm dia pole):
C
— ATS4000750: 2.5 m (8.2 ft) straight
— ATS4000716: 2.5 m (8.2 ft) 90° bend
— ATS4000719: 2.5 m (8.2 ft) 45° bend
Dip pole mounting adaptor kits
(to attach to user-supplied pole)
— ATS4000751: for attachment to 40 mm dia or
1.25 in NB pole (straight)
— ATS4000710: for attachment to 1.25 in NB pole
(90° bend)
— ATS4000711: for attachment to 1.25 in NB pole
(45° bend)
— ATS4000714: for attachment to 40 mm dia. pole
(90° bend)
— ATS4000715: for attachment to 40 mm dia. pole
(45° bend)
Note. Handrail mounting brackets are not supplied with
this kit and must be purchased separately.
Open tank flanged dip mount:
D
— ATS4000785, for mounting on user-supplied
mounting bracket
Wiper arm protective shroud assembly:
E
— ATS4000725
F Flow cell pipeline mount:
— ATS4000741, suitable for wall / surface mounting
(includes wall mounting clip)
G Handrail mounting bracket – swivel / tilt action:
— ATS4000762 for 1.25 in NB dip pole,
suitable for 42 or 51 mm (1.7 or 2.0 in) dia. handrail
— ATS4000763 for 40 mm dia dip pole,
suitable for 42 or 51mm (1.7 or 2.0 in) dia. handrail
H Handrail mounting bracket – tilt action:
— ATS4000760 for 40mm or 1.25 in dia dip pole, suitable
for 42 or 51mm (1.7 or 2.0 in) dia handrail
Retractable insertion assembly:
I
— ATS4000780, maximum pressure 10 bar (145 psi), for
mounting on user-supplied flange: BS EN 1092-1,
Type 01B, DN50, PN16, stainless steel 316L or similar.
Maximum distance from flange sealing face to pipe I/D
must not exceed 70 mm (2.75 in.).
Table 3.1 ATS430 sensor mounting / cleaning options
6 OI/ATS430–EN Rev. H | Aztec ATS430 | Turbidity sensor
A
B
D
User-supplied
mounting
bracket
F
Fig. 3.3 ATS430 sensor mounting / cleaning options
C
E
H
G