Table of Contents
Advertisement
6.1
Coupling of wireless devices with the System Access Point
free@home wireless devices must first be coupled with the System Access Point before they
can be used in a project. The devices exchange a security key during the coupling process.
Communication between devices is carried out encrypted after coupling and they are firmly
connected with the System Access Point. Coupled devices cannot be connected with a different
System Access Point. They must first be reset to the factory settings.
Carry out the following steps to couple one or several devices with the system:
1. Install the free@home wireless device(s).
2. Use your smartphone, tablet or PC to call up the user interface of the System Access Point
that is ready for use.
3. Start the scanning mode ("Settings" > "free@home-Wireless" > "Search for wireless
devices").
Fig 5:
Coupling wireless devices with the System Access Point
Product manual 2CKA001473B9425
Commissioning
│34
Advertisement
Table of Contents
