Rack Mounting Merging Unit And Test Switch Rtxp Into 19" Equipment Frame - ABB SMU615 Installation Manual

Section 4
Mounting
4.3.7
30
GUID-049159C2-3CFF-4C56-A3F6-E5A22C9D0E65 V1 EN
Figure 20: Wall mounted merging unit in rotated position
A 455 mm
Minimum of 50 mm space is needed above and below the frame for
rotating.
Rack mounting merging unit and test switch RTXP into 19"
equipment frame
A mounting kit is needed for rack mounting the merging unit into a 19" equipment
frame. In addition to the detailed mounting instructions, the mounting kit includes:
• Mounting panel
• Metallic frame for mounting the RTXP 18 or 24 test switch to the panel
A
Installation Manual
1MRS758405 C
SMU615