[:Sense]:Average Subsection - Keysight N9320B Programmer's Manual

Set the Meas Type
[:SENSE]:SEMask:TYPE TPRef|PSDRef
[:SENSE]:SEMask:TYPE?
Displays a menu where you can select a measurement reference
type, Total Pwr Ref or PSD Ref.
*RST: Total Pwr Ref
Example:
SEM:TYPE TPRef or SEM:TYPE PSDRef
Key access:
Meas

[:SENSe]:AVERage Subsection

Set the Average Count
[:SENSe]:AVERage:COUNt <integer>
[:SENSe]:AVERage:COUNt?
Specifies the number of measurements that are combined.
*RST: 1
Range: 1 to 1000
Key access:
BW/
Avg
Turn Averaging On/Off
[:SENSe]:AVERage[:STATe] OFF|ON|0|1
[:SENSe]:AVERage[:STATe]?
This command toggles averaging off and on. Averaging combines
the value of successive measurements to average out
measurement variations.
*RST: Off
Remarks: This command is turned off for video averaging
(
[:SENSe]:AVERage:TYPE VIDeo
Meas
averaging when any of the
progress, that measurement will be stopped.
Key access:
BW/
Avg
> More> Spectrum Emission Mask > Meas Type
> Average On Off
key is started. If this command is turned on for video
> Average On Off
Command Reference
SENSe Subsystem
) When a measurement under
key measurements are in
Meas
143