Keysight N9320B Programmer's Manual page 82

Command Reference
CALCulate Subsystem
Key access:
Key access:
Key access:
Key access:
76
Set the Phase Noise Offset
:CALCulate:MARKer:PHNoise:OFFSet
1kHz|-1kHz|10kHz|-10kHz|20kHz|-20kHz|30kHz|-30kH
z|50kHz|-50kHz|100kHz|-100kHz|1MHz|-1MHz
Set the maker frequency offset in phase noise measurement.
> Functions > Phase Noise > Offset
Marker
Optimize Phase Noise
:CALCulate:MARKer:PHNoise:OPTimize ON|OFF|1|0
Turns on/off the phase noise optimization function.
available when SPAN is set less than 50 MHz.
*RST: Off
> Functions > Optimize Phase Noise
Marker
Read Phase Noise
:CALCulate:MARKer:PHNoise:Y?
Reads the phase noise value.
*RST: Off
> Functions > Phase Noise > Phase Noise On Off
Marker
Peak to Peak Delta Markers
:CALCulate:MARKer[n]:PTPeak
Positions delta markers on the highest and lowest points on the
trace.
*RST: Off
> Pk-Pk Search
Peak
Search
This is only