Danalyse:ask/Fsk Subsection - Keysight N9320B Programmer's Manual

DANalyse:ASK/FSK Subsection

Average On/Off
DANalyse:ASK|FSK:AVERage[:STATe] ON|OFF|1|0
DANalyse:ASK|FSK:AVERage[:STATe]?
Turns the average function on or off.
*RST:
Off
Key access:
MODE
Average Point Number
DANalyse:ASK|FSK:AVERage:COUNt <integer>
DANalyse:ASK|FSK:AVERage:COUNt?
To specify the number of measurement averages used when the
Average is set to on.
*RST:
10
Key access:
MODE
Symbol Rate
DANalyse:ASK|FSK:RADio:STANdard:SRATe <frequency>
DANalyse:ASK|FSK:RADio:STANdard:SRATe?
Sets the symbol rate for the ASK/FSK sginals.
Key access:
MODE
Measure Filter
DANalyse:ASK|FSK:RADio:STANdard:FILTer:MEASurement
NONE|RNYQuist|NYQuist|GAUSsian
DANalyse:ASK|FSK:RADio:STANdard:FILTer:MEASurement?
Specifies the measure filter type for the ASK/FSK signals.
Key access:
MODE
> ASK/FSK Modulation Analysis > More > Average On/Off
> ASK/FSK Modulation Analysis > More > Average On/Off
> ASK/FSK Modulation Analysis > Symbol Rate
> ASK/FSK Modulation Analysis > Filter Setup > Ref filter
Command Reference
DANalyse Subsystem
95