Keysight N9320B Programmer's Manual page 121

Load a Trace From a File to the Instrument
:MMEMory:LOAD:TRACe '<file_name>'
The contents of the file are loaded into TRACE1. The file name must
have a file extension of :trc. The file extension determines whether
a trace is loaded, or a trace with its state, are loaded. The :trc
extension is for files that include both trace and state data.
Example:
:MMEM:LOAD:TRAC 'mytrace.trc'
Remarks: See commands :MMEMory:LOAD:STATe and :MMEM-
ory:STORe:STATe
If the revision of the state being loaded is newer than the revision of
the instrument, no state is recalled and an error is reported.
If the revision of the state being loaded is equal to the revision of
the instrument, all regions of the state will be loaded.
If the revision of the state being loaded is older than the revision of
the instrument, the instrument will only load the older regions of
the state.
Store a Limit Line in a File
:MMEMory:STORe:LIMit LLINE1|LLINE2,'<file_name>'
Stores the specified limit line to the specified file in memory.
Example:
:MMEM:STOR:LIM LLINE2,'mylimit.lim'
Remarks: This command will fail if the <file_name> already exists.
There is no SCPI short form for parameters LLINE1|LLINE2.
Key access:
File/
Print
> Save > Type > Limits
Command Reference
MMEMory Subsystem
115