Table of Contents
Advertisement
Command Reference
IEEE Common Commands
N O T E
Key access:
62
*OPC and *OPC? are currently effective only when immediately
preceded by either the :INITiate:IMMediate or a :CALibration
command.
Reset
*RST
This command presets the instrument to a factory defined
condition that is appropriate for remote programming operation.
*RST is equivalent to performing the two commands
:SYSTem:PRESet and *CLS. This command always performs a
factory preset.
The preset performed by
preset performed by
to
.
FACTory
> Preset
Preset/
System
Service Request Enable
*SRE <integer>
*SRE?
This command enables the desired bits of the service request
enable register.
The query returns the value of the register, indicating which bits are
currently enabled. The default value is 255.
Example:
*SRE 16 enables bits 4 in the service request enable register.
Range:
Integer, 0 to 255
is always a factory preset. That is, the same
*RST
when
:SYSTem:PRESet
:SYSTem:PRESet:TYPE
is set
Hide quick links:
Advertisement
Table of Contents
