Keysight N9320B Programmer's Manual page 78

Command Reference
CALCulate Subsystem
Key access:
Key access:
Key access:
72
Marker Peak (Maximum) Search
:CALCulate:MARKer[n]:MAXimum
Performs a peak search based on the search mode settings of
:CALCulate:MARKer:PEAK:SEARch:MODE
>
Peak
Search
Marker Peak (Maximum) Left\Right Search
:CALCulate:MARKer[n]:MAXimum:LEFT
:CALCulate:MARKer[n]:MAXimum:RIGHt
Places the selected marker on the next highest signal peak to the
left/right of the current marked peak.
Remarks: The marker will be placed at the next highest peak that rises and
falls by at least the peak excursion above the peak threshold. If no
peak meets the excursion and threshold criteria, a No Peak Found
error is given.
> Next Pk Left | Right
Peak
Search
Marker Next Peak (Maximum) Search
:CALCulate:MARKer[n]:MAXimum:NEXT
Places the selected marker on the next highest signal peak from
the current marked peak.
Remarks: The marker will be placed at the highest peak that rises and falls by
at least the peak excursion above the peak threshold. If no peak
meets the excursion and threshold criteria, a No Peak Found error
is given.
> Next Peak
Peak
Search
Peak Search
.