Command Reference
SYSTem Subsystem
SYSTem Subsystem
Key access:
Key access:
Key access:
158
This subsystem is used to set the controls and parameters
associated with the overall system communication. These
functions are not related to instrument performance.
Brightness
:SYSTem:BRIGhtness HIGH|MIDDLE|LOW
:SYSTem:BRIGhtness?
Sets and queries the brightness of the LCD display.
> More > More > Brightness
Preset/
System
GPIB Address
:SYSTem:COMMunicate:GPIB[1][:SELF]:ADDRess <integer>
:SYSTem:COMMunicate:GPIB[1][:SELF]:ADDRess?
Sets and queries the GPIB address. This command applies only to
analyzers having Option G01. Only one Option G01 can be installed
in an instrument.
*RST:
It is set to 18 by :SYSTem:PRESet:PERSistent, which sets the
persistent state values to their factory defaults. This command is
persistent. The term persistent means that the command retains
the setting previously selected, even through a power cycle.
Range:
Integer, 0 to 30
> More > More > Show GPIB Address
Preset/
System
Hardware Configuration Query
:SYSTem:CONFigure:HARDware?
Returns string of information about the current hardware in the
instrument.
> More > Show Hardware
Preset/
System