Keysight N9320B Programmer's Manual page 126

Command Reference
READ Subsystem
120
SEM measurement
:READ:SEMask?
Returns 20 scalar results, each five in a array, in the following
order:
1. The emission mask offset of lower value displayed. Used for store
the lower statistical result for power(or PSD) offset.
2. The emission mask offset of lower frequency. Used for store the
lower statistical result for frequency offset.
3. The emission mask offset of upper value displayed. Used for
store the upper statistical result for power/PSD offset.
4. The emission mask offset of upper frequency. Used for store the
upper statistical result for frequency offset.
> SEM
Key access
Meas
TOI measurement
:READ:TOIntercept?
Returns 18 scalar results, in the following order.
1. The lower base frequency value in Hz.
2. The lower base power value in dBm.
3. The lower base power value in dBc.
4. The upper base frequency value in Hz.
5. The upper base power value in dBm.
6. The upper base power value in dBc.
7. The worst case Output Intercept Frequency value in Hz.
8. The worst case Output Intercept Power value in dBm.
9. The worst case Output Intercept Power value in dBc.
10. The worst case Output Intermod Point in Hz
11. The lower Output Intercept Frequency value in Hz.
12. The lower Output Intercept Power value in dBm.
13. The lower Output Intercept Power value in dBc
14. The lower Output Intermod Point in Hz
15. The upper Output Intercept Frequency value in Hz.
16. The upper Output Intercept Power value in dBm.