Table of Contents
Advertisement
Command Reference
SOURce Subsystem
Key access:
Key access:
Key access:
154
Automatic Source Attenuation
:SOURce:POWer:ATTenuation:AUTO OFF|ON|0|1
:SOURce:POWer:ATTenuation:AUTO?
Selects if the source output level attenuator will be set
automatically, or manually.
*RST:
On
> Tracking Generator > Attenuation Auto Man
MODE
Sets the Output Power
:SOURce:POWer[:LEVel][:IMMediate][:AMPLitude] <ampl>
:SOURce:POWer[:LEVel][:IMMediate][:AMPLitude]?
Specifies the source output power level. Use
to set the change in power level across the sweep. Also see
:SOURce:POWer:STARt
*RST:
10 dBm
> Tracking Generator > Amplitude TG On Off
MODE
Sets the Source Output Power Mode
:SOURce:POWer:MODE FIXed|SWEep
:SOURce:POWer:MODE?
Sets the source output to be at a single amplitude (fixed) or to
sweep through a range of power levels.
*RST:
Fixed
> Tracking Generator > More > Power Sweep On Off
MODE
Set the Source Sweep Power Range
:SOURce:POWer:SPAN <rel_ampl>
:SOURce:POWer:SPAN?
Specifies the range of power levels through which the source
output will sweep. Use
at the start of the power sweep. This command is equivalent to
:SOURce:POWer:SWEep
*RST:
0 dB
Range:
0 dB to 20 dB
and
.
OUTPut[:STATe]
:SOURce:POWer:STARt
.
:SOURce:POWer:SWEep
to set the power level
Hide quick links:
Advertisement
Table of Contents
