Keysight N9320B Programmer's Manual page 143

Set the Channel Res BW
[:SENSe]:SEMask:BANDwidth|BWIDth[:RESolution]:AUTO
OFF|ON|0|1
[:SENSe]:SEMask:BANDwidth|BWIDth[:RESolution]:AUTO?
[:SENSe]:SEMask:BANDwidth|BWIDth[:RESolution] <freq>
[:SENSe]:SEMask:BANDwidth|BWIDth[:RESolution]?
Specifies the resolution bandwidth used in measuring and the
power in the main channel.
*RST: 30 kHz
Range: 10% to 100% of the setting of Chan Span
Example:
SEM:BAND 4 MHz
> More > Spectrum Emission Mask > Ref Channel > Res BW
Key access:
Meas
Set Chan Span
[:SENSe]:SEMask:FREQuency:SPAN <freq>
[:SENSe]:SEMask:FREQuency:SPAN?
Specifies the span used in measuring the power in the main
channel.
*RST: 5 MHz
Example:
SEM:FREQ:SPAN 4 MHz
> More > Spectrum Emission Mask > Chan Span
Key access:
Meas
Set the Offset Res BW
[:SENSe]:SEMask:BANDwidth|BWIDth[:RESolution]:AUTO
OFF|ON|0|1,...OFF|ON|0|1 (up to five values)
[:SENSe]:SEMask:BANDwidth|BWIDth[:RESolution]:AUTO?
[:SENSe]:SEMask:BANDwidth|BWIDth[:RESolution]
<freq>,...[<freq>] (up to five values)
[:SENSe]:SEMask:BANDwidth|BWIDth[:RESolution]?
Command Reference
SENSe Subsystem
137