Keysight N9320B Programmer's Manual page 84

Command Reference
CALCulate Subsystem
Key access:
Key access:
Key access:
Key access:
78
Set Stop Frequency to the Marker Value
:CALCulate:MARKer[n][:SET]:STOP
Sets the stop frequency to the value of the active marker
frequency. In delta marker mode, the stop frequency is set to the
marker delta value. This command is not available in zero span.
> Mkr –> Stop
Marker
Marker On/Off
:CALCulate:MARKer[n]:STATe OFF|ON|0|1
:CALCulate:MARKer[n]:STATe?
Turns the selected marker on or off.
> Off
Marker
Marker Table On/Off
:CALCulate:MARKer:TABLe:STATe OFF|ON|0|1
:CALCulate:MARKer:TABLe:STATe?
Turns the marker table on or off
> More > Marker Table > On/Off
Marker
Marker to Trace
:CALCulate:MARKer[n]:TRACe <integer>
:CALCulate:MARKer[n]:TRACe?
Assigns the specified marker to the designated trace.
*RST: 1
Range: 1 to 4
> More > Marker Trace Auto 1 2 3 4
Marker