Table of Contents
Advertisement
6
Check "Use socket connection" if you want to use socket to send
commands. Or you can ignore this step and leave the Use socket
connection box unchecked. The socket port number is default to
5025. Please refer to the "Using Socket to Send Commands" on
page 8 for further information on socket programming
7
Press "Test Connection" to check the LAN connection. The figure
below indicates that the connection is ready.
8
Check "*IDN query" and press "Identify Instrument". The
instrument information shows the firmware revision and product
number. The analyzer is ready for your further programming..
Remotely Operating Your N9320B
Getting Started
7
Hide quick links:
Advertisement
Table of Contents
