Table of Contents
Advertisement
Programming Fundamentals
Parameters in Commands
<rel_ampl>
<file_name>
<rel_power>
22
Variable Parameters
<ampl>,
The <ampl> (amplitude) parameter and the <rel_ampl> (relative
amplitude) parameter consist of a rational number followed by
optional units. Acceptable units for <ampl> include: V, mV, V, dBm,
dBmV, dBuV, Watts, W. <rel_ampl> units are given in dB.
A file name parameter is the name of your file, is not used in the
SCPI command string.
<freq>
A frequency parameter is a positive rational number followed by
optional units. The default unit is Hz. Acceptable units include: Hz,
kHz, MHz, GHz.
<integer>
There are no units associated with an integer parameter.
<number>
A number parameter is a member of the set of positive or negative
intriguers and including zero. Fractional numbers are included in
the number parameter. There are no units associated with a
number parameter.
<percent>
A percent parameter is a rational number between 0 and 100, with
no units.
A relative power parameter is a positive rational number followed
by optional units. The default units are dB. Acceptable units are dB
only.
<string>
A string parameter includes a series of alpha numeric characters.
<time>
A time parameter is a rational number followed by optional units.
The default units are seconds. Acceptable units include: S, MS, US.
Hide quick links:
Advertisement
Table of Contents
