Table of Contents
Advertisement
Command Reference
TRIGger Subsystem
Default Unit:
Key access:
Default Unit:
Key Access:
168
Video Trigger Level Amplitude
:TRIGger[:SEQuence]:VIDeo:LEVel <ampl>
:TRIGger[:SEQuence]:VIDeo:LEVel?
Specifies the level at which a video trigger will occur.
*RST:
2.5 divisions below reference level
Range:
10 display divisions below reference level to reference level
current amplitude units
Remarks:
Video is adjusted using this command, but must also be selected
using the command
> More > Video
Sweep/
Trig
Video Trigger Level Amplitude
:TRIGger[:SEQuence]:VIDeo:LEVel <ampl>
:TRIGger[:SEQuence]:VIDeo:LEVel?
Specifies the level at which a video trigger will occur.
*RST:
2.5 divisions below reference level
Range:
10 display divisions below reference level to reference level
current amplitude units
Remarks:
Video is adjusted using this command, but must also be selected
using the command
Demod and Demod View is on, the Video Trigger level is
adjusted/queried using the command
:TRIGger[:SEQuence]:VIDeo:LEVel:FREQuency <freq>
> Video
Sweep/
Trig
:TRIGger[:SEQuence]:SOURce VIDeo
:TRIGger[:SEQuence]:SOURce VIDeo
.
. When in FM
.
Hide quick links:
Advertisement
Table of Contents
