Connecting The N9320B To A Pc Via The Usb Port - Keysight N9320B Programmer's Manual

Connecting the N9320B to a PC via the USB Port

No extra driver is required to connect the N9320B via the USB port
to a PC. All you need is the keysight IO libraries suite and you can
find this IO libraries suite in the documentation CD in the shipment
along with your N9320B. Or download the IO libraries suite from
Keysight website:
http://www.keysight.com/find/iolib
Refer to the following steps to finish the connection:
1 Install Keysight IO libraries suite
2 Switch on the N9320B
3 Connect the analyzer to a PC with a USB cable.
Remotely Operating Your N9320B
Connecting PC
Connecting instrument
Getting Started
3