Output Subsystem - Keysight N9320B Programmer's Manual

Command Reference

OUTPut Subsystem

OUTPut Subsystem
The OUTPut subsystem controls the characteristics of the tracking
generator output port. Refer to the"SOURce Subsystem" on
page 153, which also contains commands that control the
characteristics of the tracking generator.
Turn Output On/Off
:OUTPut[:STATe] OFF|ON|0|1
:OUTPut[:STATe]?
Controls the tracking generator output.
*RST: Off
> Tracking Generator > Amplitude TG On Off
Key access:
MODE
117