[:Sense]:Power Subsection - Keysight N9320B Programmer's Manual

Command Reference
SENSe Subsystem
Key access:
Key access:
Key access:

[:SENSe]:POWer Subsection

Key access:
150
Last Frequency Span
[:SENSe]:FREQuency:SPAN:PREVious
Set the frequency span to the previous span setting.
> Last Span
SPAN
Start Frequency
[:SENSe]:FREQuency:STARt <freq>
[:SENSe]:FREQuency:STARt?
Set the start frequency.
*RST: 0 Hz
Range: –80 MHz - 3.080 GHz
> Start Freq
Frequenc
Stop Frequency
[:SENSe]:FREQuency:STOP <freq>
[:SENSe]:FREQuency:STOP?
Set the stop frequency.
*RST: 3.0 GHz
> Stop Freq
Frequenc
Input Attenuation
[:SENSe]:POWer[:RF]:ATTenuation <rel_ampl>
[:SENSe]:POWer[:RF]:ATTenuation?
Set the input attenuator. This value is set at its auto value if input
attenuation is set to auto.
*RST: 20 dB
Range: 0 to 70 dB
> Attenuation Auto Man
Amplitud