Connecting The N9320B To A Pc Via The Lan Port - Keysight N9320B Programmer's Manual

Getting Started
Remotely Operating Your N9320B

Connecting the N9320B to a PC via the LAN Port

6
No extra driver is required to connect the N9320B via the LAN port
to a PC. All you need is the Keysight IO libraries suite and you can
find this IO libraries suite in the Product CD N9320B Help Kit in the
shipment. Or download the IO libraries suite from the website:
http://www.keysight.com/find/iolib
Please refer to the following steps to finish the connection:
1 Switch on the analyzer.
2 Connect the spectrum analyzer to a PC with a LAN cable.
3 Press [Preset/System] > {More} > {More} > {IP Admin} > {IP
address} to set IP address for the instrument. For example, set
"10.0.0.5" as the IP address for the instrument.
4 Run Keysight Connection Expert in IO libraries suite. Right-click on
the LAN (TCPIP0) icon, select "Add Instrument' in the pop-up
menu. The "Add LAN Instruments" window displays for the IP
configuration.
5 Select "Add Address", check "Use IP Address" in the window and
input the IP address as the instrument IP address you set before.