Keysight N9320B Programmer's Manual page 103

Trigger Source
DANalyse:ASK|FSK:TRIGger:SOURce
IMMediate|RFBurst|EXTPositive|EXTNegative
DANalyse:ASK|FSK:TRIGger:SOURce?
Sets the trigger source type for the measurement.
> ASK/FSK Modulation Analysis > More > Trigger
Key access:
MODE
RF Trigger
DANalyse:ASK|FSK:TRIGger:LEVel:ABSolute <ampl>
DANalyse:ASK|FSK:TRIGger:LEVel:ABSolute?
Set the trigger level for the RF burst trigger.
> ASK/FSK Modulation Analysis > More > Trigger > RF Trigger
Key access:
MODE
Trigger Delay
DANalyse:ASK|FSK:TRIGger:DELay <time>
DANalyse:ASK|FSK:TRIGger:DELay?
Sets the trigger delay for the trigger event. A trigger event is
defined as the point at which your trigger source signal meets the
specified trigger level.
> ASK/FSK Modulation Analysis > More > Trigger > Trigger
Key access:
MODE
Delay
Display Type
DANalyse:ASK|FSK:VIEW SYMBol|WAVeform|EYE|ERRor
DANalyse:ASK|FSK:VIEW?
Sets the display type for the ASK/FSK signals.
> ASK/FSK Modulation Analysis > View
Key access:
MODE
Command Reference
DANalyse Subsystem
97