[Cmb0] Peg Count - NEC Univerge NEAX 2000 IPS Command Manual

COMMAND CODE TITLE:
B0
FUNCTION:
This command allows accumulated data of use for maintenance purposes to be read from the system
PEG counter. Data can be cleared after reading.
PRECAUTION:
When the system is reset, the contents in the memories of the PEG counter are all cleared.
ASSIGNMENT PROCEDURE:
Y=0
• To clear individual data
+ + DE
ST B00
• To clear all PEG COUNT data
+ + DE
ST
B00
• To display
ST + + DE
B00
Y=2
• To set the PEG COUNT measurement start/end time
+ + DE
ST B02
• To display the PEG COUNT measurement status
ST + + DE
B02
PEG COUNT
TRUNK STATUS DATA
+
(3-5 digits)
+ + DE +
999 CCC
TRUNK STATUS DATA
+
(3-5 digits)
1ST DATA
+ +
DE
(0/1)
+ +
DE
2
+ + +
DE CCC
+
EXE
+
DE
2ND DATA
+ +
EXE
(8 digits)
– 654 –
EXE
NWA-008844-001 Rev.5.0
CMB0
91ch3007.fm