[Cmdd00] Smdr Functions (1)/Do Not Disturb Group Set/Cancel - NEC Univerge NEAX 2000 IPS Command Manual

COMMAND CODE TITLE:
DD00
FUNCTION:
This command is used to assign the Station Message Detail Recording (SMDR) functions and Do not
disturb group set/cancel when using PN-AP00-B/PN-AP00-D with MRCA program.
[Series 3300]
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
ST + + DE
DD00
DATA TABLE:
DATA
0 Send detail information of tandem calls to SMDR terminal 0
1 Send detail information of tandem calls to SMDR terminal 1
2 Send detail information of tandem calls to SMDR for Central-
ized Billing-CCIS
3 Local office or Center office for Centralized Billing-CCIS
4 Action when the memory for SMDR has overflowed (for SMDR
terminal 0)
5 Action when the memory for SMDR has overflowed (for SMDR
terminal 1)
6 Operation for displaying the totaled call charge of a individual
station
[For EU]
[Series 3900]
SMDR FUNCTIONS (1)/DO NOT DISTURB GROUP SET/CANCEL
1ST DATA
+ + DE +
(1-3 digits)
1ST DATA
FUNCTION
2ND DATA
+ EXE
(0/1)
0 : Not sent
1 : To send
0 : Not sent
1 : To send
0 : Not sent
1 : To send
0 : Local office
1 : Center office
AP00 INITIAL
0 : New data is stored by deleting the
1 : No new data is stored
0 : New data is stored by deleting the
1 : No new data is stored
0 : Not available
1 : Available
– 861 –
: Initial Data
2ND DATA
oldest data
oldest data
Continued on next page
NWA-008844-001 Rev.5.0
CMDD00
91ch3009.fm
JUNE/01/2007