NEC Univerge NEAX 2000 IPS Command Manual page 270

COMMAND CODE TITLE:
14
1ST DATA
DATA MEANING
XX ZZZ XX : FP/Virtual AP No.
(00-63)
ZZZ: AP/Virtual PIM
Port No. (000-127)
STATION NUMBER, TRUNK NUMBER, CARD NUMBER FOR EACH FP
DATA
EC00
EC31
ED00
ED03
EE3 XXX
2ND DATA
MEANING
Add-on Module number
NOTE 1: For the FP No. 00-03, the Add-on
Module number (EC00-EC31)
should be assigned as follows.
For FP No. 00: EC00-EC07
For FP No. 01: EC08-EC15
For FP No. 02: EC16-EC23
For FP No. 03: EC24-EC31
NOTE 2: For the FP No. 04-31, the Add-on
Module number can be assigned
without limit as shown above
NOTE 1.
NOTE 3: The Add-on Module number is also
effective when system is a Remote
Site of Remote PIM over IP.
NOTE 4: The same number (the last two dig-
its of the data) should not be used
for both DSS Console number
(E100-E131) and Add-on Module
number (EC00-EC31).
[Series 3200 R6.2 (R6.2)]
Card number of Conference Trunk
(PN-CFT)
[Series 3200 R6.2 (R6.2)]
Card number of CS/ZT Interface
XXX represents CS/ZT number (000-255)
– 246 –
CM14
RELATED
COMMAND
CM90
CM98
INITIAL
CMAD
Continued on next page
NWA-008844-001 Rev.5.0
91ch3002.fm
NOVEMBER/15/2006