[Cmf0] Mp Memory Dump; [Cmf1] Mp Memory Read/Write - NEC Univerge NEAX 2000 IPS Command Manual

COMMAND CODE TITLE:
F0, F1
FUNCTION:
These commands are used only for maintenance.
DO NOT USE these commands without the assistance of a NEC engineer.
ASSIGNMENT PROCEDURE:
CMF0: MP Memory Dump
ST + F0 + DE
Display XXXXXXXX: YY YY YY YY
Designated
Address
NOTE: This command is used only for memory display and cannot be used for memory changing.
CMF1: MP Memory Read/Write
ST + F1 + DE
NOTE: You must be extremely careful in using this command while the system is in service.
MP MEMORY DUMP
MP MEMORY READ/WRITE
ZXXXXXXXX
+ +
Address
Z : 0-F (Segment)
XXXXXXXX: 00000000-FFFFFFFF (Address)
YY: 00-FF (Data)
NOTE
ZXXXXXXXX
+ +
Address
Z : 0-F (Segment)
XXXXXXXX: 00000000-FFFFFFFF (Address)
DE
Data of the designated address
Data of the designated address + 1
Data of the designated address + 2
Data of the designated address + 3
DE + XX + EXE
New Data
– 767 –
CMF0, F1
NWA-008844-001 Rev.5.0
91ch3008.fm