NEC Univerge NEAX 2000 IPS Command Manual page 838

COMMAND CODE TITLE:
D001
Quick Reference Data Table for SMDR (NEAX 2400 IMS Format)
1ST DATA
PORT 0 PORT 1 PORT 2 PORT 3
93 113
94 114
95 115
96 116
98 118
NOTE 1:
For the Port 1 and Port 3, data speed 9600 bps cannot be set.
NOTE 2: The 2nd data=4 is used for either the SMDR or the PMS. If the 2nd data=4 is assigned to the
Port 0 (1st data=80) for the SMDR/PMS, assign the 2nd data=5 to the Port 1 (1st data=100),
the Port 2 (1st data=120) or the Port 3 (1st data=140) for the SMDR.
SMDR/CIS/PMS FUNCTIONS (2)
133 153 Number of times to resend the Selecting
Sequence when NAK is returned in Phase 3
134 154 Number of times to resend the Selecting
Sequence when no answer in Phase 3
135 155 Delay before resending the Selecting
Sequence when NAK is returned
136 156 Delay before resending the text when
WABT is returned
138 158 Guard timer between texts
MEANING
– 814 –
CMD001
: Initial Data
2ND
MEANING
DATA
0 Not used
0 Not used
0 Not used
0 Not used
0 Not used
NWA-008844-001 Rev.5.0
91ch3009.fm