[Cmd012] Station Group Number; [Cmd013] Station Group Number; [Cmd014] Station Group Number - NEC Univerge NEAX 2000 IPS Command Manual

COMMAND CODE TITLE:
D012, D013, D014
FUNCTION:
CMD012 is used to assign a Group number to each station as the Charging Group. CMD013 and
CMD014 are used to divide the Charging Groups into Medium Group or Large Group.
By grouping the stations in this way, the sum of the detail and total bills for the stations belonging to
each Group can be printed out.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
ST + D012/D013/D014
DATA TABLE:
• CMD012: For assigning a Group number to each station
1ST DATA
X-XXXX: Station number
(1-4 digits)
00-07 : ATTCON number
(2 digits)
NOTE:
Assign Group number 128 to stations in which a Group number is not assigned.
• CMD013: For assigning a Medium Group number to each Group number
1ST DATA
000-127: Group number assigned by
CMD012
NOTE: Assign Group number 232 to a Group number which is not included in a Medium Group num-
ber.
STATION GROUP NUMBER
1ST DATA
+ DE +
(1-4 digits)
000-128: Group number
200-232: Medium Group number
2ND DATA
+ DE +
(3 digits)
2ND DATA
2ND DATA
– 834 –
CMD012, CMD013, CMD014
+ EXE
REMARKS
REMARKS
Continued on next page
NWA-008844-001 Rev.5.0
91ch3009.fm