NEC Univerge NEAX 2000 IPS Command Manual page 854

COMMAND CODE TITLE:
D003
DATA
27 Limit value of remaining Call Record memory block number to
output external alarm
NOTE: When the data is set to 1-27000, external alarm of mem-
ory overflow is available, if CM44 2nd data=3004 or
CMEA Y=2>28 is assigned.
28 Maximum number of Call Record for CIS
[Not used in North America]
NOTE 1: When the data is set to 1-12000, external alarm of
memory overflow is available, if CM44 2nd da-
ta=3000 or CMEA Y=2>28, 38 is assigned.
NOTE 2: Billing memory clear by CMD102 is required.
See PRECAUTION (1), PRECAUTION (2).
29 Maximum number of Call Record for SMDR/PMS which is set
to "4" by CMD001>80/100/120/140
NOTE 1: When the data is set to 1-27000, external alarm of
memory overflow is available, if CM44 2nd da-
ta=3001 or CMEA Y=2>28, 38 is assigned.
NOTE 2: Billing memory clear by CMD102 is required.
See PRECAUTION (1), PRECAUTION (2).
30 Maximum number of Immediate Printout Call Record for Printer
which is set to "16" by CMD001>80/100/120/140
NOTE 1:
When the data is set to 1-1000, external alarm of
memory overflow is available, if CM44 2nd da-
ta=3003 or CMEA Y=2>28, 38 is assigned.
NOTE 2: Billing memory clear by CMD102 is required.
See PRECAUTION (1), PRECAUTION (2).
31 Stored number of Call Record for automatic printout
NOTE:
Once the stored Call Records are printed out, the Call
Records are erased from the memory.
TIME BLOCK ASSIGNMENT (1)/
MAXIMUM NUMBER OF CALL RECORD ASSIGNMENT
1ST DATA
FUNCTION
0
1
27000: 27000 calls
0
1
100 :100 calls
12000: 12000 calls
0
1
100 :100 calls
27000: 27000 calls
0
1
100 :100 calls
1000 : 1000 calls
0
1
12000: 12000 calls
– 830 –
: Initial Data
2ND DATA
: Not record
: 1 call
: Not record
: 1 call
: Not record
: 1 call
: Not record
: 1 call
: No limitation
: 1 call
NWA-008844-001 Rev.5.0
DECEMBER/02/2005
CMD003
91ch3009.fm