NEC Univerge NEAX 2000 IPS Command Manual page 328

COMMAND CODE TITLE:
20
SETTING DATA: 100-515
SETTING DATA
DATA
100 Trunk Route 00
163 Trunk Route 63
200 Route Advance Block 00
231 Route Advance Block 31
300 Tenant Block 00
323 Tenant Block 23
500 Kind of Special Terminal Block 00
515 Kind of Special Terminal Block 15
NUMBERING PLAN/SINGLE DIGIT FEATURE ACCESS CODE
(PROGRAMMABLE)
MEANING
REMARKS
Data is to be assigned for Trunk
Routes corresponding to the access
codes for outgoing trunk calls (COT,
LDT, ODT, etc.).
Data is to be assigned in the following
two cases; there are two or more trunk
routes for outgoing call, and for deter-
mining the seizing order of the trunk
route.
Data is to be assigned when the pur-
pose and method of the same access
code varies with each tenant.
Data is to be assigned when the pur-
pose and method of the same access
code varies with each special terminal
(single line station).
– 304 –
CM20
RELATED
COMMAND
CM30
CM22
CM23
CM25
NWA-008844-001 Rev.5.0
91ch3003.fm
JULY/01/2006