NEC Univerge NEAX 2000 IPS Command Manual page 560

COMMAND CODE TITLE:
76
Y
No. MEANING
24 DID Name assign-
ment with charac-
ter
25 DID Name assign-
ment with charac-
ter code
26 CID Call Routing
for DID on ISDN,
ANI, MFC
32 Hotel/Motel DID
number allocation
to guest station
[Series 3600]
33 Whether the call
terminating
method is speci-
fied for DID
incoming call with
no CLI in Day
Mode
[Series 3600]
NOTE: Assign the call terminating method by CM76 Y=34 when this command is set to 0/1.
NOTE: Number Conversion Block No. 200-999 cannot be used for this assignment.
DIGIT CONVERSION ON DID CALL
1ST DATA
DATA
000-199:
Number Conver-
sion Block No. X......X
assigned by NONE
CM76 Y=00/90,
XXX...X
CM2A Y=50-52
NOTE
NONE
000-999:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90
000-999:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90
000-999:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90
2ND DATA
MEANING
X Character
(Maximum 16 digits)
X: 0-9, A-Z
No data
Character Code
(Maximum 32 digits, 16 characters)
See Character Code Table in
CM77.
No data
0 To provide
(Using Development Pattern 0)
1 To provide
(Using Development Pattern 1)
2 To provide
(Using Development Pattern 2)
3 Not provided
0 Available
1 Not available
0 Specified when reason of the incom-
ing calls with no CLI is "Privacy"
1 Specified for all incoming call with
no CLI
3 Not specified
– 536 –
CM76
: Initial Data
REMARKS
CM15
Y=123, 136
CM15
Y=123, 136
CM2A
Y=50-52
CM08>824
CM76
Y=01-04
CM76 Y=34
Continued on next page
NWA-008844-001 Rev.5.0
91ch3005.fm
JUNE/01/2007